User Manual
Table Of Contents
- 3.1 【Main unit】
- 4.1 Tracking
- 4.2 Fixed upload
- 4.3 Blind spot data storage
- 4.4 Cornering compensation
- 4.5 Multiple position method
- 4.6 Built in antenna
- 4.7 Push to call
- 4.8 Temperature sensor
- 4.9 Built in battery
- 4.10 Quick charge function
- 4.11 Power save mode
- 4.12 Voice function
- 4.13 Remote setting
- 4.14（FOTA）
- 4.15 Multiple IPs connection
- 4.16 IP rated
- 5.1.1 SIM installation
- 5.1.2 Parameters setting
- 5.2.1 Upload interval setting
- 5.2.2 Position mode
13
MT35 usage requirements
The terminal is strictly forbidden to use according to the operating instructions ,disassemble,
collide, charge, soak, over 80 °C, human failure, force majeure damage, etc. may cause short
circuit, insufficient working time, battery deformation, liquid leakage, explosion, no warranty and
compensation will be provided by KINGWO.
LBS,A#
Set LBS ON and OFF:
，A=1 ON ；A=0 OFF，Default is off
Example:
LBS,1# LBS ON
LBS,0# LBS OFF
LBS# Query
*77*0number#
Set center No.1
*77*2 number#
Set center No.2
*11*1#
Query center No.
*11*3#
Query longitude and latitude
*11*4#
Query device status Eg:
Online: IP1 CMNET,119.23.233.52:6000,T ID: 80222001633,id
GPS=A,5;GSM=20 MT02S-4.12.128.10 2019-08-06
*22*1#
Restore to factory setting
*22*4#
Reboot device