+ MT35 User manual Personal and Asset Tracker -++
Declaration The contents of this manual will be updated from time to time without prior notice; the updated content will be added to the new version of this manual. KINGWO will improve or update the products or procedures described in the manual at any time. If there is a description of the product in the manual that does not match the actual product, the actual product shall prevail. KINGWO has the final interpretation rights of this manual.
Contents 1. Product features ................................................... 4 2. About the product .................................................. 5 3. Technical Specification .............................................. 6 3.1【Main unit】 ................................................... 6 4.Functions ......................................................... 7 4.1 Tracking ................................................................................................................7 4.
PART 01 Product Overview ● Rechargeable ultra-long standby position and monitor terminal ● built in with 2900mah industrial grade rechargeable polymer lithium battery ● Built in High-sensitivity G-sensor, suppress the static drift and automatically switch the working mode.
PART 02 About the product ⑧ Lanyard ⑦ Speaker ④Battery ⑤ GSM ③ GPS ② SIM 1 1 Charging+ Power Charge port +power button ⑨ Microphone Waterproof cover After removing the cover SIM cover Remove cover 2 SIM card slot 3 GPS signal GPS blinks if fixed 4 Battery level Battery status Micro USB and power switch Micro SIM 4
5 GPRS Blinks if it is working 6 SOS SOS Button 7 Speaker Waterproof speaker 8 Lanyard Hole Lanyard hole 9 Microphone Two way communication PART 03 Technical Specification 3.1 【Main unit】 Characteristics Description Battery Polymer lithium battery，Capacity 3.7V/2900mAH； Working current Average current <60mA@3.7V； Sleep current <2mA@3.
SOS Support SOS function for emergency alarm Temperature sensor Built in temperature sensor, to detect environmental temperature LED Indicator GSM, GPS, battery Remote upgrade （FOTA） Support remote configuration and firmware upgrade Wake up Built G-sensor, to detect the device is in static or motion status Multiple IP Support multiple IPs connecting at same time Working time Working：30 seconds Standby ：10 minutes Dimension 85mm*51mm*20mm Environment Working temperature：-20℃~70℃； Storage tem
4.2 Fixed upload The device can be configured to upload the vehicle location, status info to the backend at a certain time or at a certain period or according to certain time interval 4.3 Blind spot data storage When the device enters the GPRS blind zone, the trace data will be saved at the shortest interval which is 15s, and the blind zone data will be uploaded to the platform when the GPRS is back online. The blind zone compensation data can be saved up to 1,000 packets 4.
4.8 Temperature sensor The device has built in temperature to detect the environment temperature and send to backend to analyze 4.9 Built in battery The device is with built in lithium battery, it can real time upload the battery level status, and there are 4 indicators on the device to indicate the battery level status for remotely monitor the battery status 4.10 Quick charge function The device has quick charge function, it supports V/2A or 5V/1A power adaptor and charge via Micro-USB interface 4.
4.14（FOTA） As long as GPRS is available, the new firmware can be upgraded remotely 4.15 Multiple IPs connection The device supports dual IPs,it can be connected to main server and backup servers 4.16 IP rated The device is IP67 rated, including SIM card slot, buttons, USB interface, speakers and microphone for better waterproof and dusty proof 5.1 Installation and debugging process 5.1.
5.2 Important Parameter Setting 5.2.1 Upload interval setting Command format: HC, , # Command description: T1: Start upload interval, the value range is 5-300 seconds, the default is 15 seconds. T2: Sleep interval, ranging from 300 to 1800 seconds, defaulting to 600 seconds. For example: HC, 30, 300# Set the data upload time to 30 seconds and the sleep upload time to 300 seconds. 5.2.
IP,www.365qczx.com,6000,0# Set the primary server domain:www.365qczx.com，Port 6000， communication type UDP Set IP, port and communication type of backup server IP2,119.23.233.52,6000,1# Set the backend server IP:119.23.233.52,port 6000，communication IP2,ip or dns,port,type# type is TCP IP2,www.365qczx.com,6000,0# Set the backend server domain:www.365qczx.
Set vibration alarm: A=1:Vibration alarm ON A=0:Vibration alarm off Default is off M: Alarm mode，M=0 Only GPRS,M=1:SMS+GPRS ZD,[,M]# Example: ZD,1,1#， Vibration alarm ON, notification mode: GPRS+SMS ZD,0# Vibration Alarm Off ZD# Set enter sleep mode time while in static status: Default is 5 minutes XM,tttt# Query IMEI/ICCID/IMSI Set blind data storage ON and Off，A=1 Off；A=0 ， Default ON *44*6DDDDD# XM,5# Sleep after 5 mins without vibration XM,0# Disable sleep mode function XM# Query IMEI
Set LBS ON and OFF: ，A=1 ON ；A=0 OFF，Default is off LBS,A# Example: LBS,1# LBS ON LBS,0# LBS OFF LBS# Query *77*0number# Set center No.1 *77*2 number# Set center No.2 *11*1# Query center No. *11*3# Query longitude and latitude Query device status Eg: *11*4# Online: IP1 CMNET,119.23.233.52:6000,T ID: 80222001633,id GPS=A,5;GSM=20 MT02S-4.12.128.
-- Contact us Shenzhen Kingwo IoT Co., Ltd +86 0755 86704262 marketing@kingwoiot.com www.itracksense.com www.kingwoiot.
