User Manual

—
11
—
3.1.3 Major parameter setting by SMS or SSCOM tool
SMS list:
APN,apn,user,pwd#
Set APN, User name and password
For example:
APN,CMNET,internet,internet#
APN:CMNET
Username: internet
Password: internet
APN,CMNET#
APN:CMNET
User name: Null
Password:Null
IP and port
Set IP, port and communication type of primary server ,
For example:
IP,119.23.233.52,6000,1#
Set the primary server IP:119.23.233.52，port 6000，communication
type:TCP
IP,www.365qczx.com,6000,0#
Set the primary server domain:www.365qczx.com ， Port 6000 ，
communication type UDP
HX,<T>#
Sleep mode return interval, default 1440 minutes, that is, 24 hours t:
wake-up time, unit: minutes range: 5-43 200 minutes
for example: hx,120#
ZZ,A,[,T1,T2]#
Track mode
A: A=1,Enter track mode A=0 Exit track mode
T1: upload interval in track mode，unit：seconds
Range：5-300 seconds
T2:The continue track time in track mode，Unit： Minutes
Range ：5-57600 minutes
WAKEUP,T1[,T2[,T3[,T4]]]#
Latency mode sets a multipoint return parameter, up to four points
in time
T1…T4: A point in time, such as 0830 for 08:30 in the morning
FALL,A#
A=3 Switch on removal alarm, do not track, defalut value
A=2 Switch on removal alarm, track 15 mins, 300 seconds once
A=1 Switch off removal alarm
A=0 Swtich on removal alarm, track 60 minutes, 60 seconds once
UTC,TTTT#
Set time zone, unit minute ,default UTC+8:00
STORAGE,T#
Storage mode return interval, default is 0, that is, turn off t: wake-up
time, unit: minute value range: 2880-43200 minutes for example:
storage,10080
MS,m,s#
Motion static detection mode, m: return interval during motion,
default 60 minutes, value range 5-43 200 minutes s: static
return interval, default 720 minutes, value range 5 43 200 minutes
For example: ms,120,1440—return interval during motion is 120
minutes and static return interval is minutes.
*11*4#
Query communication status of the device
*22*1#
Device resume to factory setting
*22*4#
Restart the device
*77*0 number#
Set center number 1
*77*2 number#
2 Set number 2