User's Manual

Table Of Contents

-6-

E.Pairing the digital wireless camera and receivers

When you get the digital wireless cameras or receiver, you must pair them before use it,

following the instructions as below:

1.Power on the digital wireless camera and receiver by inserting the power adaptor jack.

2.Press the PAIR/CH or PAIR button of receivers and not release until the power LED

begin to flash, and the monitor will reveal the picture as below, then release the

PAIR/CH button.

3.Press the PAIR button of digital wireless camera once within 30 seconds . They will

automatically link to each other by ID code after pairing finished.

4.Please don't turn off their power during the paring status.

5.When pairing successfully, the power LED for both will be lit directly (not flash)

Pairing button