User's Manual

-3-
B.Introduction
Thank you for purchasing this 2.4GHz Digital transmission system. This system is a
digital wireless receiver/digital wireless CMOS camera that uses 2.4GHz Frequency
Hopping technology and GMSK modulation, and each client has an ID for paring to
protect personal privacy.
Multiple receiver can get max. 4 pcs wireless cameras KW2431 to be quad display on
one TV monitor, or connect to DVR BNC input.Single receiver can get only one.
1 pcs wireless cameras KW2431, and display on one TV monitor, or connect to DVR
BNC input.
There are over billion hopping sequences to minimize interference and deliver
consistently an excellent video and audio quality up to 150 meters away
(open site and line of sight)
Using this 2.4GHz Digital Wireless system, you can enjoy greater convenience and
security in many ways:
Safety & Security Application:
Connect a digital wireless camera as a wireless security system
Monitor your sleeping baby, playing children, the elderly, or the disabled on TV by
single or multiple receivers See who is outside the door on TV through digital wireless
CMOS camera.Monitors and records the meeting from another room.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance 
requirements, the antenna(s) used for this transmitter must be installed to 
provide a separation distance of at least 20 cm from all persons and must not 
be co-located or operating in conjunction with any other antenna or transmitter. 
No change to the antenna or the device is permitted. Any change to the 
antenna or the device could result in the device exceeding the RF exposure 
requirements and void user’s authority to operate the device.