G200 User Guide 1
THANK YOU For purchasing your G200 Advanced Air Purifier Our mission is to protect the lungs of those you love by bringing pure, safe air to those most susceptible to poor air quality. The unique advantage of our proprietary, patented technology is the ability to capture ultrafine particulate matter down to 10 nanometers in size with a portable, lightweight device. EASY TO PUT TOGETHER, NO TOOLS REQUIRED! If you have any questions, please contact our Customer Care team at 1-833-CELIOS1 or customer.
Table Of Contents G200 PACK AGE CONTENTS • CELIOS G200 PRODUCT SPECIFICATIONS • IMPORTANT SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS version 201104_v1 6 7 8 WHERE TO PLACE YOUR G200 10 SETTING UP YOUR G200 12 • INSTALLING THE AIR FILTERS 12 • INSTALLING THE LITHIUM ION SMART BATTERIES 17 • SETTING UP THE REMOTE CONTROL 22 REMOTE CONTROL SETTINGS 25 CORE PANEL DESCRIPTIONS 28 CLEANING YOUR G200 29 G200: ALARMS & NOTIFICATIONS 30 TROUBLESHOOTING 32 CELIOS LIMITED WARRANTY 34
G200 Package Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. G200 Core Main Stand Mini Stand Core Filter Carbon Filters Pre Filters Lithium Ion Smart Batteries Remote Control Power Adapter AAA batteries* User Manual* CELIOS G200 Product Specifications 1 2 9 8 3 Power Requirements: DC input 15V, 4A ; Power brick 100-240V, 50-60Hz, 1.5A AC Power Usage: Idle - 0.6W, Speed 1 - 2.5W, Speed 2 - 3.8W, Speed 3 - 6.5W, Speed 4 - 22W Dimensions (with main stand): 14.125” X 5.75” X 10.
READ AND SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INFORMATION WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device. WARNING: Unplug or disconnect the appliance from the power supply before servicing. WARNING: The appliance is only to be used with the power supply unit provided with the appliance and it must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
Where to place your G200 The Celios G200 is designed to purify air in small rooms or personal spaces such as your bedroom, office, or car to create a zone of purified air around you. The G200 comes with a Main Stand and a Mini Stand. You can easily move the G200 Core between its two stands. Main Stand The Main Stand includes a Carbon Filter that removes Volatile Organic Compounds (VOCs) which include gasses and odors such as those emitted from common household products.
Setting up your G200 STEP 1: Install the Core Filter INSTALLING THE AIR FILTERS The G200 comes with one Core Filter. This patented mechanical filter captures ultrafine particules down to 10 nanometers in size. You will need to replace your Core Filter about every 8 months. The G200 uses three different powerful air filters. All are colored blue for easy identification. You will need to order a G200 Filter Pack about every 8 months.
1 2 14 Install the Pre Filter Install the Carbon Filter The G200 comes with two Pre Filters. You will install one and save one for future use. The Pre Filter is made from material often found in HVAC systems, specifically designed to capture large airbone particles such as dust, pollen, and pet dander. You will need to replace your Pre Filter about every 4 months. The G200 comes with two activated granular Carbon Filters. You will install one now and save one for future use.
2 Place the Carbon Filter into the tray as shown. STEP 2: 2. Slide the tray back into position in the G200 Main Stand. INSTALLING THE LITHIUM ION SMART BATTERIES Note: The Carbon Filter tray will click when fully installed. 3 16 1. The G200 runs on either outlet power or Lithium Ion Smart Batteries, which are included with your G200 purchase. These batteries are hot swappable, which means you can remove either of them without shutting down the G200 or interrupting air purification.
1 Install Batteries into the G200 Core Dock the G200 Core in the Main Stand 1. 1. Plug the Power Adapter into the Main Stand and then to a powered electrical outlet. 2. Slide the G200 Core into the Main Stand. The control panel on the Core will be facing to the same side as the Remote. 3. When you correctly dock the G200 Core in the Main Stand, the unit will beep (whether you have AC power or not).
Charge the batteries Charging the batteries the first time 1. Properly charging the batteries will allow maximum runtime and battery life. The following procedure should be followed on the first charge of any new batteries. 2. After turning on the G200 Core, the battery life indicator on the control panel shows that the batteries are charging. When the batteries are fully charged or when there are no batteries in the G200 Core, the battery life indicator light will turn off.
22 STEP 3: Pair the Remote Control with the G200 Core SETTING UP THE REMOTE CONTROL 1. Install the provided two AAA batteries into the Remote Control. The G200 uses a Bluetooth remote control device, which can work within a 75 ft range. When not in use, store the remote control in the slot on the front of the G200 Main Stand. 2. With the G200 powered on, press and hold the Core power button for 6 seconds.
Remote Control Settings 4. After 6 seconds, both the Core and the Remote Control light will stop flashing. The two are now paired. The Remote Control will stay paired to the G200 Core as long as it has power. Note: If the Remote Control is not paired properly, the light will blink. Please try again. You can control the G200 settings from: 1 2 • The control panel on the Core • The G200 Remote Control 1. POWER BUTTON Turns the G200 on and off 2.
3 The Celios G200 Advanced Air Purifier operates at four fan speeds, so you can adjust the power to best meet your needs. G200 FAN SPEED With functioning AAA batteries, the indicator will illuminate with each press of a button on the Remote Control. The light also flashes during pairing. If the light does not illuminate, please check or change the AAA batteries.
Core Panel Description Cleaning your G200 CLEANING THE G200 GRILLS Power Button Fan Speed Button If you notice that the G200 airflow is weaker than expected, or if the grey grills on the top of the Main Stand look dirty, then it is time to clean the grills. The grills are magnetically attached and can be removed from the Main Stand and cleaned with soap and water. Allow to dry before replacing.
G200: Alarms & Notifications The G200 LED panel will display an alert when the filters are approaching or due to be changed: • When you correctly dock the G200 Core in the Main Stand with power, the unit will beep. • If the G200 becomes blocked and there is no airflow an alarm will sound. • When you install the first battery (partially or fully charged) the G200 will beep to let you know that the battery is installed correctly.
Troubleshooting Problem 32 Possible Cause Solution Unit does not power on • Battery(ies) or AC adapter not installed • Battery(ies) installed do not have charge • Install charged Batteries or connect to AC adapter • Replace Batteries with charged ones or install AC adapter Battery should be charging • • • • • • The battery light will not display when full and attached to AC adapter • Insert 1 or 2 batteries into either slot • Plug AC adapter into a working outlet • Install new Battery and recycle o
Celios Limited Warranty Celios Corporation warrants that, for a period of one year from Product shipment, the Product will conform to its published specifications under normal use in accordance with the documentation provided with the Product. In the event that you believe you have a warranty claim, contact Celios at customer.care@celios.com or 1-833-CELIOS1 for return instructions. For all warranty returns, a Return Authorization number and Proof of Purchase is required.
CUSTOMER SUPPORT If you have any questions about your Celios G200 air purifier visit www.Celios.com/Support or contact us by phone or email: www.Celios.com 1-833-CELIOS1 customer.care@celios.
