User's Manual


Test alerts
To receive email and text message alerts when motionis detected.
Factory Reset
After
factory resetting, all settings will be cleared.
Carefully open the bottom case of Motion Detector.
Press and hold the Set Button for about 20 seconds till there the status LED is green and red
blinking alternately.
Warning
Refrain from using harsh
chemicals or cleaning agents on thedevice. Only use a clean, dry cloth to
clean the device.
Do not use rechargeable batteries.
Do not dispose of batteries in fire as they may explode.
Please follow your local battery disposal procedure.
Motion D
etector
2017 KingTing Tech. Corporation
To receive email and text message alerts when motionis detected.
factory resetting, all settings will be cleared.
Carefully open the bottom case of Motion Detector.
Press and hold the Set Button for about 20 seconds till there the status LED is green and red
chemicals or cleaning agents on thedevice. Only use a clean, dry cloth to
Do not dispose of batteries in fire as they may explode.
Please follow your local battery disposal procedure.
etector
Press and hold the Set Button for about 20 seconds till there the status LED is green and red
chemicals or cleaning agents on thedevice. Only use a clean, dry cloth to