User's Manual

Long Range LoRa™ TechnologyTransceiver Module

source current.
Additional filtering capacitors are not required but can be used to ensure stable supply voltage in
noisy environment.
4.0
PHYSICAL DIMENSIONS
Figure 4-1 and Figure 4-2
illustrate the physical dimensions and the recommended PCB layout for
the KT1276 module.
FIGURE 4-1:
KT1276 PHYSICAL DIMENSIONS
FIGURE 4-2:
RECOMMENDED PCB FOOTPRINT
5.0
APPLICATION INFORMATION
• RF pins and strip line
The RF signals must be routed with properly terminated 50 Ohm strip lines. Use curves instead of
sharp corners. Keepthe routing path as short as possible.
Long Range LoRa™ TechnologyTransceiver Module
KT1276
2017 KingTing Tech. Corporation
Additional filtering capacitors are not required but can be used to ensure stable supply voltage in
PHYSICAL DIMENSIONS
illustrate the physical dimensions and the recommended PCB layout for
KT1276 PHYSICAL DIMENSIONS
RECOMMENDED PCB FOOTPRINT
APPLICATION INFORMATION
The RF signals must be routed with properly terminated 50 Ohm strip lines. Use curves instead of
sharp corners. Keepthe routing path as short as possible.
KT1276
Additional filtering capacitors are not required but can be used to ensure stable supply voltage in
illustrate the physical dimensions and the recommended PCB layout for
The RF signals must be routed with properly terminated 50 Ohm strip lines. Use curves instead of