User's Manual

Instructions
1. DownloadingandinstallingApp
There are three ways to acquire the App for this software:
1) Scan the QR code printed on box with phone.
2) Search YoSmart on App Store and download the App.
a) Visitwww.YoSmart.com
，go to support and download；
After App installation, run ，and follow the instructions to register an
accountand connect to the device。
2. ResettingtheHub
While the Central Controller is charged, insert anything round (we recommend a paper
clip) that is below the size of 1.6mm inside"Reset"; pressing it once will reset the device.
3. FactoryReset
Warning:Afterfactoryresetting,allsettingswillbecleared.
Power off theHub (by unplugging the Micro-USB power connector)
1. Use a1.6mmround object topress the Reset button inside the hardware，and
then plug in the power connector while holding the button.
2. After plugging in the power connector, you will hear a beeping sound. Keep
pressing on the Reset button until you hear a higher pitched beeping sound.
3. Release the Reset button, and you are set.