Usser'sM Manu ual LED DStripCo ontrolller Easy, Simple, S In ntuitive KingTingTech.Co orporation n For more in nformation,, please visitwww.YoS Smart.
ProductD Descrip ption Nam me LED Strrip Controlller Model KT-LC-U01B Inputvoltage DC 5V or 12V Sign nal Com mmunicate ed RF 915MHz Thrrough Weight Temperatu ure Preference e ~45g g ℃ ~ +55℃ -10℃ MaxCurre ent 5A Working Within eyesight or Range <= 100 meters Notte：This pro roduct can be used with wi YoSmarrt Hub or YoSmart Yo LED D Strip Rem mote Con ntroller. + OR + Fun nction Featu ures： 1.
ProductInstallation Before installation: a) You will need a 12VDC Power Adapterand 12V RGB LEDStrips； b) Or 5VDC Power Adapterand 5V addressable LEDStrips； Installation Steps： a) Connect this product to the LED Strips (Note: 5V and 12VLED Strips are connected to different connector); b) Connect this device with the power adapter; c) Plug the power source adapter into a power outlet;
Operations 1． LinkingLEDStripControllerwithYoSmartLED StripRemoteControllerorYoSmartHub Before Operation: a) LED Strip Controller should be connected to a power source; Operating Steps: a) Use the LED Strip Remote Controller or the YosmartHub start the Linking command; b) Press the LED Strip Controller's button (LINK) for more than seconds until the green indicator LED flashes, then release the button; c) After the linking completes successfully, the green indicator LEDwill stop flash
a) LED Strip Remote Controllershould alreadyhave batteries installed and check to see that the green light indicator appears when pressing any buttons; b) The LED StripController has been connected to a power source; Operation Steps: a) On the remote control, select the desired linked of lights with the group; For example: Press the button "8" to categorize the corresponding LED strip to group 8; b) Press and hold the "LINK" button more than 8 seconds, until the red LED blinks, then release the "LINK
3. FactoryReset Note: After factory resetting the product, it will be restored to factory settings and clear all the linking information. Operation Steps: a) Unplug the power adapter connector, a LED Strip Controller stopped working; b) When press and hold the LED Strip Controller's LINK button and connect the LED Strip Controller's power. c) Hold on the Button more 10 seconds, until the red LED light start flashing, release the button, the LED Strip Controller will start factory reset.
