User's Manual

blunote 2.0™
Rev. D 5/8/17
9
Portable Wireless Bluetooth Speaker
WS-4014 User Guide
Introduction
Thanks for buying the blunote 2.0'", the portable
wireless 8 /uetoot
庐
speaker you can pair with smart
phones and tablets (iOS and Android) and PC/Mac.
Listen to music or use the speaker for phone calls. This
guide will provide important information for your use.
Features
• High quality microphone to take and make calls
when paired with your smart phone.
• Passive Bass Radiator provides deep, rich, bass
tones for a more powerful sound.
• Did we mention it's really loud? You'll be surprised
at how much sound a small speaker can generate
without distortion: 10 watts (2 x 5W, two channel).
• Rechargeable 1000 mah Lithium battery for long
playing enjoyment. Take it with you!
• Pause/Play/Answer Call, Next Track, Back Track
and Volume controls on the top of the unit so you
can control your music from either blunote 2.0™ or
your 8 /uetoot
庐
enabled device.
Specifications
Loudspeaker Output: 40, 10 watts (2 x 5W)
Built in Battery: Li-Ion1OOOmAh
Dim.: 7.1" x 2.95" x 1.77" (180mm x 75mm x 45mm)
SNR: 80
士
3d B
Wireless Working Frequency: 2.402-2.480 Ghz
Wireless Bluetooth®range: up to 33'(10m)
Playback time: N12 hrs.
Charging time: 3-4 hrs.
Weight: 10.6 oz (300 gr)
Speaker dimension: 45mm
Charging: 5V, 500mA
Package Contents
1. blunote 2.0'" Speaker
2. 3.5mm Audio cable
3. USB Charging cable
4. User Guide
8
blunote 2.0'" Controls
1. ON/OFF button
2. Last Track
3. Play/Pause
4. Next Track
5. Volume Up
6. Volume Down
7.
Accept call/Hang up
8. Micro USB Charging Port
9. Aux In Jack
Powering On
Press and hold the ON/OFF button for 2 seconds. The blue
LED will blink rapidly. blunote 2.0'" will automatically be in
8 /uetoot
庐
pairing mode.
Note: If you use the audio cable plugged into the Auxjack,
only the Volume Up and Volume Down buttons are functional.
The rest of the controls on the top are disabled.
Powering Off
Press and hold the ON/OFF button for 2 seconds.
Pairing your A2DP Bluetooth 心 evices with blunote 2.0'"
When pairing for the first time:
1. Make sure the device you're pairing with is within range,
so less than 33'(10m) away .
2. Press and hold the ON/OFF button for 2 seconds. The blue
LED will blink rapidly indicating blunote 2.0™ is in pairing mode.
3. Navigate to the Bluetoot
庐
Manageron your device. If you're
not sure where that is, refer to your device's User Guide.
4. Your device should search for 8/uetooth®devices within
range and find "Blunote 2.0".
5. Once your device is paired, the blue LED on blunote 2.0'"
will blink slowly, and you will hear a tone. You're now ready
to listen to music or make calls using the speaker as the
output device.
Note: If blunote 2.0™ doesn't pair in10 minutes, it will time out.
Listening To Music
blunote 2.0" can be controlled eithe
「
from your paired
Bluetoot
庐
device or the controls on top of blunote 2.0
己
Play - press 1>11
Turn Bluetoot
庐
off - press and hold 1>11
Volume Up - press{,
Volume down - press
=
Next track - press
芘
Last track - press
氐
Using blunote 2.0™ as a speakerphone for calls
If blunote 2.0" is connected to a smartphone you can use
blunote 2.0™ as a speakerphone.
Press
令
to answer the call.
Press
气
to end the call.
Press and hold
气
for 2 seconds to reject the call.
Charging
Connect the Micro-USB end of the included charging cable
to the charging port on blunote 2.0". Plug the other end of
the cable into a USB port on a computer or other USB
charger. The battery will take about 4 hours to charge when
completely drained.
During charging the red LED on blunote 2.0" will be on.
When the battery is fully charged, the light will turn off.
LED Status Lights
When charging: Red LED solid on - charging
Red LED off - charging complete
When pairing: Blue LED blinking rapidly - ready to pair
Blue LED blinking slowly - Bluetoot
庐
paired
When using Aux audio cable: Blue LED solid on - Aux mode
Troubleshooting
l .. H
Uv
ad
lU@
@
blunote 2.0™
doesn't pair with
your device
blunote 2.0
旧
needsto be paired/
connected with your device
you hear a tone every few
seconds
blunote 2.0™ needs charging
blunote 2.0" doesn't power on
blunote 2.0™ needs charging
blunote 2.0™ doesn't control
the tracks or volume
blunote 2.0™ needs to be in
Bluetooth ® mode not Aux mode
blunote 2.0™ distorts at high
volume
lower the volume on your
paired device