User's Manual

Bluetooth Speaker User’s Manual

Description

Introduction

Thank you for choosing the S6 Speaker as your source

for entertainment. You can use this item with iPad, iPhone,

iPod and many types of smart-phone to stream music

and enjoy hands-free calling. For the best results,

please read this manual before using the speaker.

Include

1. Speaker

2. 3.5 mm Audio Cable

3. User Manual

Specification

BluetoothRange：33ft（10M）

TWSdistance：11.5ft（5M）

Dimensions:236mmx59.5mmx102.8mm

BTVersion：4.2

Output：2x10W

Speaker/driversize：57mm4Ω 10W

Battery:7.4V 2400mAh 3C

Charging:4 H

Important Safety Information

1.Keep this product and its charging cable away from

excessive heat;

2.Do not operate this device with a damaged cable

or after it has malfunctioned or has been damaged

in any manner;

3.Do not disassemble your device;

1.ON / OFF

2.Next Music/Volume

3.Pause/Phone

4.Previous Music/Volume

5.Bluetooth LED

6.Micro USB Charging Port

7.AUX in Port

FCC ID: N7KS6

Model Name: S6

PAGE 1
FCC ID: N7KS6 Model Name: S6 Bluetooth Speaker User’s Manual Introduction Thank you for choosing the S6 Speaker as your source for entertainment. You can use this item with iPad, iPhone, iPod and many types of smart-phone to stream music and enjoy hands-free calling. For the best results, 1.ON / OFF Include 2.Next Music/Volume 1. Speaker 2. 3.5 mm Audio Cable 3. User Manual 3.Pause/Phone please read this manual before using the speaker. 4.Previous Music/Volume Important Safety Information 5.
PAGE 2
Operation Begin Streaming Music TWS Wireless Stereo Mode Aux-In Mode Power on Press Press Press Press If you have two pieces S6, you can use TWS function to achieve wireless stereo combined-playing music. Plug in the supplied 3.5 mm audio cable into the unit. The other end is connected to your device. The unit will automatically enter the Aux-In mode. Please note music and volume can be controlled by your device. Press and Hold “ ” button 2 seconds to power ON.
PAGE 3
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.