User's Manual

3. PRODUCT DESCRIPTION

1. Power on / off - Play /

Pause - Answer / End

phone call

2. Volume Up / Next Track

3. Volume Down / Previous

Track

4. TWS (True Wireless

Stereo)

5. Bluetooth/ Reset button

6. Power LED

7. Status LED

4. OPERATION

Charging your speaker

1. Connect one end of the USB charging cable to the charging port

on your speaker. Plug the other end of the cable into a suitable

USB port on your computer.

Note: A full charge takes approximately three hours.

2. A white LED light will turn on to indicate that the unit is charging.

The white light will turn off when the battery is fully charged.

Turning the speaker on/off

Power on: Press and hold the

button for 3 seconds to power on

Power off: Press and hold the button for 3 seconds to power off

the speaker. The white LED will turn off.

Pairing Bluetooth devices with your speaker

In order to pair your Bluetooth audio device with your Bluetooth

1. Make sure your Bluetooth audio source is close to the speaker.

2. Press the button for 3 seconds to power on the speaker. The

3. Enable Bluetooth on your device (phone or audio device). Refer

to the manufacturer’s instructions for details.

4. Search for Bluetooth devices and select “Q12P”.

the pairing process.

5. The speaker will beep when the devices are paired. The white

LED will switch on and your portable device will disp