User's Manual

Powering ON/OFF
Press and Hold "ON/OFF" button 2 seconds to power on and power off.
Battery capacity indicator timeout:10 minutes, press any button the indicator
will light again.
Pairing
The unit will automatically go into “Pairing Mode” when it is
powered on, the LED light will blink white to indicate that you have entered
pairing status.
Go into your Bluetooth device settings menu and look for “H1”, once paired,
the white LED light will be solid and you can use your speaker to listen to
audio from you Bluetooth sound source.
Press and hold the Bluetooth button to disconnect the Bluetooth
Begin Streaming Music
Press “ ” to start playing music, press shortly “ ” pause music.
Press and Hold “ ” 2 seconds to play the next track.
Press and Hold “ ” 2 seconds to play the previous track.
Press either “ ” or “ ” for volume control.
Making and Receiving Phone Calls
When the unit is connected and paired to your device,
the unit allows you to make or receive phone calls with its
built-in microphone.
Press “ ” to accept and end a call.
To reject a call, press and hold “ ”
When using both speakers, you must only do this on the master(left) speaker
Aux-In Mode
Plug in the supplied 3.5 mm cable into the unit. The other end is
connected to your device. The light blue LED will stay illuminated .
It means in “Aux” mode.
Please note music can be controlled by your device.
In Aux Mode,
Press shortly “ ” to increase the volume
Press shortly “ ” to lower the volume
Press shortly “ ” to mute AUX function