User's Guide

To charge the speaker please follow these steps:
1. Use the supplied USB charging cable to connect the micro USB charging socket
(DC5V IN) of the Bluetooth speaker to the adapter or another charging USB port.
2.When connecting to a USB port, please note that the charging input is 5V.1A
3.During the charging process, the LED indicator lights up RED -as soon as the
charging process is finished, the indicator switches off.
To turn the speaker on and off, push and hold the “ ”-button for 3 seconds.
1. Turn the speaker on.
2.Once the power is on, the unit turns default into Bluetooth mode, while there is no
other connection.
3.The blue LED will start to blink, which means, that the connection is ready to be paired.
4.The item will automatically connect to the last Bluetooth device firstly.If no found, it
will enter pairing mode and wait for a new Bluetooth device to connect and the LED will
keep blinking.
5.On the Bluetooth device, switch on Bluetooth setting and search for
"HEYSONG REVERB".There is a signal tone once connecting successfully.
6.You can also control the playback of your music from the speaker
PLAY MUSIC → Press “ ”to start the music and stop the music
MUSIC FORWARD OR RETURN → Press and hold the “ ”or “ ”buttons
REGULATE VOLUME → Press the “ ”or “ ”buttons
7. To disconnect the item from current Bluetooth device, choose to "Disconnect" on the
connected Bluetooth device or press and hold the“ ”button.
1. Bluetooth
2. ON/OFF、Light switch
3. Volume increase/ Next track
4. Volume decrease/ Previous track




2
4
3
1
Strap
LED light
TF
AUX IN
DC 5V IN