User's Manual

Connection waiting mode

1. If the speaker is powered on and no Bluetooth device is available for pairing, the speaker will enter

' Connection Waiting Mode'. If a Bluetooth device becomes available, press the On/Off button to connect

automatically.

2. If no Bluetooth device becomes available, the speaker will power off automatically after ten

minutes.

True Wireless Stereo (TWS) Function

If you have two IJOY TIKI + , you can use them both in sync to listen in True Wireless Stereo (One speaker

will play only the Left Channel, the other will play only the Right Channel).

1. Make sure both IJOY TIKI +'s are without any Bluetooth connection.

2. Power on both units and press On/Off button on the speaker. The two speakers will connect

automatically and you should hear the indicating tone. When the blue LED blinks quickly on one unit and

blinks slowly on the other, the TWS has connected successfully.

3. Under connection, search Bluetooth device and select 'IJOY TIKI +'.

4. Hands-free function is only available on the master speaker.

5. The Pause music function is not available. If you press the Phone Button to pause the music, the

speaker will be muted.

Connection to an analog audio source

1. Use the 3.5mm to 3.5mm (included) to connect to the 3.5mm Analog input jack on the speaker.

2. Connect the other end to the analog audio source.

3. Set the desired volume on the attached device. The LED light will be turn to Green.

4. Press shortly 'Vol + button' to increase the volume

5. Press shortly 'Vol + button' to lower the volume

6. Press shortly 'Phone button' to mute the speaker

Removable stake

Included in the box is a removable plastic stake. Just attach it to enjoy freestanding music in the ground, sand or snow.

Listen in the garden, on the beach or at a festival, but when you’ve had enough of the outdoors, just remove the stake and

continue the party indoors.

How to use: Mount the two parts of Stake, and then mount the stake to the Speaker