User's Manual

Setting the lighting mode: Short press on the Lighting Effects button cycles the speaker lighting between

Off and 5 effect modes.

A) Slow transition for all LED colors

B) Solid white(LED color)

C) Dancing mode to the music

D) Each LED color on its own

E) Blinking white

3. Previous song / Vol - Button: To go back the previous track, press the Volume Down Button for 1

second. To lower the volume, press and hold the Volume Down Button for more than 1 second.

4. Power on/off Button: To power on your speaker, press and hold the On/Off Button. To power off your

speaker. Press and hold the On/Off Button.

5. Next song / Vol + Button: To skip to the next track, press the Volume Up Button for 1 second. To raise

the volume, press and hold the Volume Up Button for more than 1 second.

6. AUX in port : Use the attached 3.5mm to 3.5mm audio cable to connect the speaker and an analog

audio source.

7. Type-C charging port: Use the attached Type-C to USB charging cable to charging your speaker.

8. Removable stake port: Use the attached removable stake to connect the speaker and the stake.

Bluetooth Pairing Procedure

1. Turn on you mobile device and go to the Bluetooth menu.

2. Make sure the speaker is within three meters from the mobile device.

3. Press and hold the On/Off Button on your speaker to power on. The LED light will blink blue to

indicate that you have entered paring mode.

4. Select 'IJOY TIKI+' on the Bluetooth device menu. Ensure that the device shows 'Connected' in the

status display. (If a PIN is required, enter 0000.)

5. Press and hold the Phone Button on your speaker to enter Bluetooth paring mode.

Reconnecting to a disconnected device

1. If previously connected to a Bluetooth device, the IJOY TIKI+ will automatically reconnect with the

device when powered on.

2. The speaker will not automatically reconnect if the three meters distance is exceeded.