User's Manual

 Charging time : Approx. 3 hours

 Weight: kg

 Charging: 5 V, 500mA

Package contents

1* Waterproof IP66 speaker

1* USB to Type-C charging cable - 50cm

1* 3.5mm to 3.5mm AUX cable - 50cm

2* Removable stakes

1* User manual

Important Safety Precautions

When using your Bluetooth Mobile Speaker, basic safety precautions should always be followed, including

the following:

• Keep this product and its accessories away from excessive heat.

• Do not operate this device with a damaged cable or after it has malfunctioned or has been damaged in

any manner.

• No sharp object should be subjected to the speaker/speaker-drivers as it may damage the speakers.

• Only use a soft cloth, no harsh abrasives or chemicals to clean, as it may damage the surface finishing.

• Ensure the speaker is waterproof by removing all the connected cables and the cap is tightly closed

before exposing the speaker to liquid.

• Do not expose the speaker to water while charging, as doing so may result in damage to the speaker or

the power source.

Charging your Speaker

1. Connect one end of the included USB Charging Cable to the Charging Port on your speaker. Then plug the

other end of the USB Charging Cable into a suitable USB port on your computer, notebook or power bank

to recharge your speaker's internal rechargeable battery.

2. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn

off when your unit is fully charged(under both turn-on/off speaker status)