ASSEMBLY INSTRUCTION 9823-2R(SPK) RIGHT 2-SEATER WITH 2 BIG & 1 SMALL PILLOWS & RSF ARM A BACK CUSHION B 2PCS E RIGHT ARM FRAME ALLEN KEY (Underneath the 2-seater) 3"*1-1/8" 1PC C 2PCS F 1PC I BIG PILLOW WOODEN LEG (Underneath the 2-seater) BOLT (Underneath the 2-seater) 5/16"*3" D 1PC G 4PCS J SMALL PILLOW FLAT WASHER (Underneath the 2-seater) 5/16"*3/4" 1PC H 4PCS K 4PCS PLASTIC WASHER (Underneath the 2-seater) 5/16"*1-15/16" 4PCS 2-SEATER LOCK WASHER (Underneath the 2-seate
1 Take out the wooden leg(F) / plastic washer(K) / plastic cap(L) / bolt(J) / flat washer(G) / lock washer(H) / allen key(I) from the bottom of 2-seater(D). D I H G J K F L 2 Assemble the right arm frame(E) with the bolt(J) / flat washer(G) / lock washer(H) / allen key(I), please don't fasten tightly until the 4 bolts are into the holes.
4 Put the back cushion(A) / big pillow(B) / small pillow(C) on the 2-seater(D). B A B A C D 5 Assemble the left chaise, armless chair, corner and right 2-seater with hook properly. (Left chaise, armless chair, corner are not in the right 2-seater carton.) Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
ASSEMBLY INSTRUCTION LEFT CHAISE WITH 1 BIG & 1 SMALL PILLOWS & LSF ARM A BACK CUSHION B BIG PILLOW C SMALL PILLOW D CHAISE E I 1PC LEFT ARM FRAME 1PC ALLEN KEY (Underneath the chaise) 3"*1-1/8" 1PC F J 1PC WOODEN LEG (Underneath the chaise) 5PCS BOLT (Underneath the chaise) 5/16"*3" 4PCS G K 1PC FLAT WASHER (Underneath the chaise) 5/16"*3/4" 4PCS PLASTIC WASHER (Underneath the chaise) 5/16"*1-15/16" 5PCS H L 1PC LOCK WASHER (Underneath the chaise) 5/16"*1/2" 4PCS PLASTIC CAP (Underneath
1 Take out the wooden leg(F) / plastic washer(K) / plastic cap(L) / bolt(J) / flat washer(G) / lock washer(H) / allen key(I) from the bottom of chaise(D). I H G D J K F L 2 Assemble the left arm frame(E) with bolt(J) / flat washer(G) / lock washer(H) / allen key(I), please don't fasten tightly until the 4 bolts are into the holes.
4 Put the back cushion(A) / big pillow(B) / small pillow(C) on the chaise(D). B C A D 5 Assemble the left chaise, armless chair, corner and right 2-seater with hook properly. (Armless chair, corner, right 2-seater are not in the left chaise carton.) Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
ASSEMBLY INSTRUCTION ARMLESS CHAIR WITH 1 BIG PILLOW B BIG PILLOW C A BACK CUSHION 1PC D WOODEN LEG (Underneath the chair) 4PCS 1PC E 1PC PLASTIC WASHER (Underneath the chair) 5/16"*1-15/16" 4PCS CHAIR F PLASTIC CAP (Underneath the chair) ø3/4"*3/4" 4PCS This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
1 Take out the wooden leg(D) / plastic washer(E) / plastic cap(F) from the bottom of chair(C). E C D F 2 Align the wooden leg(D) to the pre-drilled holes on the bottom of chair(C), pad with the plastic washer(E) and screw them tightly, then insert the plastic cap(F). C E D F 3 Put the back cushion(A) / big pillow(B) on the chair(C).
4 Assemble the left 2-seater, corner, armless chair and right chaise with hook properly. (Left 2-seater, corner, right chaise are not in the armless chair carton.) Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
ASSEMBLY INSTRUCTION CORNER SEAT WITH 1 BIG & 1 SMALL PILLOWS A LEFT BACK CUSHION B RIGHT BACK CUSHION C BIG PILLOW 1PC E CORNER 1PC 1PC F WOODEN LEG (Underneath the corner) 4PCS D 1PC G PLASTIC WASHER (Underneath the corner) 5/16"*1-15/16" 4PCS SMALL PILLOW 1PC H PLASTIC CAP (Underneath the corner) ø3/4"*3/4" 4PCS This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
1 Take out the wooden leg(F) / plastic washer(G) / plastic cap(H) from the bottom of corner(E). G E F H 2 Align the wooden leg(F) to the pre-drilled holes on the bottom of corner(E), pad with the plastic washer(G) and screw them tightly, then insert the plastic cap(H). E G F H 3 Put the left back cushion(A) / right back cushion(B) / big pillow(C) / small pillow(D) on the corner(E).
L-Shape 4 Assemble the corner and right 2-seater with hook properly. (The right 2-seater is not in the corner carton.) 5 Assemble the left 2-seater and corner with hook properly. (The left 2-seater is not in the corner carton.) Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
U-Shape 4 Assemble the armless chair and right chaise with hook properly. (The armless chair and right chaise are not in the corner carton.
5 6 Assemble the corner and armless chair with hook properly. (The armless chair is not in the corner carton.) Assemble the left 2-seater and corner with hook properly. (The left 2-seater is not in the corner carton.) Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
