Datasheet
THIS DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE.
©2016 Kingston Technology Europe Co LLP und Kingston Digital Europe Co LLP, Kingston Court, Brooklands Close,
Sunbury-on-Thames, Middlesex, TW16 7EP, England. All rights reserved. All trademarks and registered trademarks
are the property of their respective owners. EN
MKD-337
Industrial Temperature microSD UHS-I
SPECIFICATIONS
> Capacities
5
8GB, 16GB, 32GB, 64GB
> Performance
6
UHS-I Speed Class 1 (U1)
• 8GB: 90MB/s read and 20MB/s write,
• 16GB-64GB: 90MB/s read and 45MB/s write
> microSD Dimensions 11mm x 15mm x 1mm
> SD Adapter Dimensions 24mm x 32mm x 2.1mm
> Format FAT32 (microSDHC 8GB-32GB); exFAT (microSDXC 64GB)
> Operating & Storage Temperature -40°C to 85°C
> Voltage 3.3V
> Thermal Cycle Testing interval testing completed at various
extreme temperatures
> Vigorous Temperature Humidity Bias several hundred hours
of testing to ensure durability at varying levels of humidity
> Wide Temp Chamber Testing completed on all SDCIT cards
prior to production
> Warranty
7
5 years
> Industrial-grade features — The card’s operating temperature
rating of -40°C to 85°C makes it perfect for harsh environments.
For durability, it’s rated for 10,000 minimum insertions.
> Tested for industrial applications — Kingston uses wide and
broad temperature testing so you can feel secure using the card
in industrial applications.
> UHS-I interface — Its UHS-I interface oers higher sustained write
speeds to ensure data integrity by reducing transmission stutter.
> MLC NAND — MLC NAND allows for large amounts of data to be
written to the card.
FEATURES/BENEFITS
1 IEC/EN 60529 IPX7 certied for protection against continuous water submersion for up to 30 min.
and a depth of up to 1m.
2 Withstands temperatures ranging from -40 °C to 85 °C.
3 Based on MIL-STD-883H, METHOD 2002.5 military standard test method.
4 ISO 7816-1 certied for protection against 0.1 Gy of X-ray radiation to both sides of card.
5 Some of the listed capacity on a Flash storage device is used for formatting and other functions
and is thus not available for data storage. As such, the actual available capacity for data storage
is less than what is listed on the products. For more information, go to Kingston’s Flash Guide at
kingston.com/ashguide.
6 Speed may vary due to host and device conguration.
7 Kingston Flash Cards are designed and tested for compatibility with consumer-grade market
products. It is recommended that you contact Kingston directly for any OEM opportunities or special
use applications that are beyond the standard daily consumer usage. For more information on
intended use, please refer to the Flash Memory Guide at kingston.com/ashguide.
OPTIONAL ACCESSORIES
FCR-MLG4 – MobileLite G4, USB 3.0 Card Reader
FCR-HS4 – USB 3.0 All-in-One Media Reader
SDCIT/8GB
SDCIT/16GB
SDCIT/32GB
SDCIT/64GB
Card only (SD adapter not included):
SDCIT/8GBSP
SDCIT/16GBSP
SDCIT/32GBSP
SDCIT/64GBSP
PART NUMBERS