Parts: Washer Cone Washer & Bolt & Lock Nut Coupling Nut 1Pc 1Pc PCs www.
1. Flush plumbing INSTALLATION INSTRUCTIONS For Use With KB's Single Handle Faucet with or without Push Drain BEFORE BEGINNING INSTALLATION lines to clear any dl 5. 2. Shut off both supply lines after flushing. 1 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove old faucet 2 Inset the blat lino the faucet body. Screw the lockout and tighten it. Rubber Washer Brass Washer Lock Nut PUSH Teflon Tape 3.
Replacement Parts: Cartridge: KBRP521C Handle: KBH3401PL CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing. 2 Clean your faucet with only a mild soap and water solution 3.
