KINGSTON BRAS THE TRAIT e s e Washer Bolt |Cone Washer| Support & & Lock Nut Lock Nut | Coupling Nut 1Pc 1 Pc PCs PCs www.kingstonbrass.
Need Tools: INSTALLATION INSTRUCTIONS =7 [~y For Use With KB's Single Handle Faucet M = <= without Push Drain Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing, 1 5 6 POM Washer H Metal Washer. Rubber Washer & r £ Metal Washer Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove old faucet 2.
Parts: Replacement Parts: Cartridge: KSRP3831C Handle: GSYH8881 ACL CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing. 2 Clean your faucet with only a mild soap and water solution 3.
