Installation Guide

PAGE 1
PAGE 2
B BRASS INSTALLATION INSTRUCTIONS For Use With KB's Twin Handles Lavatory Faucet with or without Pop-Up BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. 1] 1. Shut off hot and cold wale supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove old faucet 2. Insert the inlet shanks through the sink holes, and press down. Assemble the washers and lockouts on the inlet shanks, and then Heighten the nuts by hand.
PAGE 3
Replacement Parts: Cartridge: KBRP101C S Handle: KBH5611AX CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing. 2 Clean your faucet with only a mild soap and water solution 3.