Use and Care Manual

STEP2: SINK INSTALLATION
Place the vessel sink through the opening on the countertop and check for leveling and fittng.
Apply silicon sealant around the bottom rim of the sink as shown below.
Install the sink and check for alignment. Apply some caulking around the base of the sink to seal any gap
between the sink and the countertop.
Set for 30 60 minutes for sealant dryoff.
Install the Pop up drain according to the manufacturer’s installation instructions. Connect trap to drain. Install
the waste system, faucet, and the water supply (not provided) according to the manufacturer’s installation
instructions. Check for leakage.