Use and Care Manual

1. Read this instruction carefully before installation. Inspect sink for damages. Don

not install if the sink is damaged.

2. Kingsman Hardware recommends that installation of Vessel sink s be done by a

professional installer.

3. Cutout Templates are not provided for Vessel sink installation.

4. Kingsman Hardware is not responsible for improper sink or countertop installation.

Kingsman Hardware is not liable for any damages to sink or countertop or personal

injury during installation.

5. The instructions in this guide are for installation on granite, marble or cultured stone

countertops ask your fabricator for proper installation instructions. Remind your

fabricator to install the sink in a way that it can be.

PAGE 1
. Read this instruction carefully before installation. Inspect sink for damages. Don not install if the sink is damaged. 2. Kingsman Hardware recommends that installation of Vessel sink s be done by a professional installer. 3. Cutout Templates are not provided for Vessel sink installation. 4. Kingsman Hardware is not responsible for improper sink or countertop installation. Kingsman Hardware is not liable for any damages to sink or countertop or personal injury during installation. 5.
PAGE 2
STEP2: SINK INSTALLATION  Place the vessel sink through the opening on the countertop and check for leveling and fittng.  Apply silicon sealant around the bottom rim of the sink as shown below.  Install the sink and check for alignment. Apply some caulking around the base of the sink to seal any gap between the sink and the countertop.  Set for 30 – 60 minutes for sealant dryoff.  Install the Pop up drain according to the manufacturer’s installation instructions. Connect trap to drain.
PAGE 3