Installation Guide

ManualsBrandsKingsman Hardware ManualsFarmhouse Kitchen SinksKingsman White Fireclay 30 in. Single Bowl Farmhouse Apron Reversible Kitchen Sink with Strainer

Table Of Contents

Instructions for Farmhouse Apron Sink Installation

Before Installation:

Read installation and maintenance instructions prior to installation. Inspect your sink for any

noticeable damage before installation. Examine all local applicable plumbing and building codes.

Instructions are based on application to composite material or solid surface countertop installation

only; other countertop applications such as stone, marble, granite or butcher-block should be left to

experienced countertop fabricator for custom installation.

Kingsman Farmhouse series sinks are hand-crafted and it is suggested to use experienced installers

for the sink installation. For custom cutting of countertop and installation of sink, on-site installation

is recommended. Acceptable variances are approximately 1/2 inch. Alignment to cut-out and precise

application and trimming of any adhesive sealant are important to the ideal fit and finished look of the

sink. Please be cautious in this regard.

Kingsman Farmhouse series sinks require custom order cabinets. Consult your cabinet dealer.

Kingsman does not accept any liability for damage to countertop, sink fixture, faucets or personal

injury during the installation process. Warranty is void if installation instructions are not followed.

Required Tools and Materials:

 Measuring Tape

 Denatured Alcohol

 Wood Brackets

 Pencil (Avoid ink)

 Ear Plugs/ Earmuffs

 Carpenter Square

 Silicone Adhesive Sealant

 Safety Glasses

 Contractor Shims

 Rags

 Hacksaw/Jigsaw

Summary of content (5 pages)

PAGE 1
Instructions for Farmhouse Apron Sink Installation Before Installation: Read installation and maintenance instructions prior to installation. Inspect your sink for any noticeable damage before installation. Examine all local applicable plumbing and building codes.
PAGE 2
Step by Step Installation: 1. Preparing the sink base cabinet Farmhouse sinks require custom order sink base cabinets with a front cutout to accommodate a 10 inch deep sink. First, build structural supports on the inside frame of the sink base cabinet. The structural supports must bear the weight of sink and any attachments such as garbage disposals. When the sink is placed onto the cabinet support, make sure the top of sink is even against the bottom of countertop.
PAGE 3
Installation Options: Kingsman Farmhouse series sinks offer 3 installation options depending on the design. Undermount Installation Flush mount Installation Figure 1 Above counter Installation Figure 2 Figure 3 Note: All installation types need to allow room for faucet installation. Leave sufficient space behind sink for any faucet and backsplash, as well as full range of motion for faucet spouts and handles. Regular undermount installation with 1/4 inch reveal recommended.
PAGE 4
Recommended Care & Maintenance Do  Clean frequently by thoroughly rinsing with a mild soap and warm water then wipe dry.  Wipe gently with a soft cloth in the direction of grain lines routinely for preventative cleaning.  Keep sink free of any standing water as this can cause a buildup of mineral deposit, which can affect the appearance of sink.  Any stains should be removed by scrubbing in the direction of the grain with a mild abrasive such as Comet.
PAGE 5
FARMHOUSE APRON KITCHEN SINK LIMITED LIFETIME WARRANTY EFFECTIVE May 1, 2018 Kingsman offers the following limited warranty on each of its Kitchen Sink products* (the “Product”). This warranty extends only to original owner or enduser for personal household use. For commercial uses, additional limitations apply.