Instructions / Assembly

3D Stone Panel Installation Instructions
Please read carefully to ensure appropriate use of product
Preparation of items and tools required:
Tile Adhesive or Power Grip Liquid Leveler Utility Knife Ruler Trowel
Step 1: Ensure that your surface that you are installing the panels on has a relatively smooth surface. Clean the
area to ensure no debris that may cause the panels to be uneven. Repair and patch area of major damage prior to
installing panels.
Step 2: Plan your design thoroughly and precisely before applying the first panel. Determine your placement by
drawing a grid on the wall to aid your decision whether it will be wall to wall or a floating design with finished
boarders. Ensure to measure and mark vertically and vertically and use a carpenter’s square for assistance.
Step 3: Once you have decided the placement of the panels, Ensure the panels are straight as possible and apply
the recommended adhesives above evenly on the back of the panel. Let the adhesive set on the panel. While
setting, apply adhesive on the wall. Apply the panels to the associated marked area starting from the top corner.
During transition to the next panel, ensure to minimize the distance between each tile to minimize the seams.
Continue for the rest of the panels. Use pins and or apply pressure on the four corners and edges of each panel.
Step 4: If cutting is required on some panels and designs, use a standard utility knife.
Step 5: Apply glue with the trowel and spread throughout entire panel. Attach the panels onto the wall and apply
firm pressure to ensure it is attached to the wall. Address seams between transition between panels to ensure
they are same level.