User's Manual

11
 To lock the door, simply reverse the operation making sure the metal pin is engaged completely. Then
remove the key and place it is a secure place for safekeeping.
LAYOUT AND STORAGE
Your cabinet was designed to store a maximum number of beverage securely. We recommend that you
observe the tips below to optimize loading.
 Remove tape from shelves once unit is stable and ready for storage.
 Disperse the bottles evenly to avoid concentrating weight in one place. Bottles must not touch either the
back of the cabinet or the step at the bottom. Make sure that the bottles are not all grouped together either
at the top or bottom of the cabinet. Bottles dispersed evenly throughout the cabinet will contribute to
optimal cooling.
 Only pull out one rolling shelf at a time. Never attempt to pull more than one.
 Maximum weight capacity per shelf is 55 lbs.
CARE AND MAINTENANCE
Cleaning Your Beverage cooler
 Turn off the power, unplug the appliance, and remove all items including all shelves.
 Wash the inside surfaces with a solution of warm water and baking soda (approximately 2 tablespoons of
baking soda for each quart of water.)
 Wash the shelves with a mild detergent solution.
 Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.
 Wash the exterior with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
 Vacuum the front grill and back of the unit twice yearly. Make sure the power is off before cleaning.
 It is recommended to clean the unit completely inside and out once a year to maximize the longevity of the
beverage cooler.
Power Loss
 Power failures that are corrected within a few hours should not affect the temperature of your appliance if you
minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you
need to take other measures to protect your contents.
 If the unit is unplugged, loses power, or is turned off, you must wait 3 to 5 minutes before restarting.
Attempting to restart the beverage cooler before this time has elapsed may prevent the beverage cooler from
starting.
Absence/Vacation
 Short vacations: You may leave the beverage cooler powered on and unattended for absences of less than
three (3) weeks.
 Long vacations: If the appliance will not be used for more than three weeks, remove all items and turn off the
appliance. Clean and dry the interior thoroughly. To prevent mold growth, leave the door open slightly,
blocking it open if necessary.
Moving Your Beverage cooler
 Remove all items.
 Securely tape down all loose items (shelves) inside your appliance.
 Turn the adjustable leg up to the base to avoid damage.
 Tape the door shut.