Manualshelf

User's Manual

ManualsBrandsKingsBottle ManualsBeverage CentersKingsBottle 24 inch Wide 334 Can Capacity Beverage Center
12345678910
10
Power: Turns the beverage cooler system on or off.
Lighting: Turns the interior beverage cooler light on or off.
Power/Lighting: Lock/Unlock button.
°C/°F: Alters the temperature display to Fahrenheit or Celsius
Display Window: Displays temperature
Temp. Up: Increases temperature by 1°.
Temp. Down: Decreases temperature by 1°.
BEFORE YOU START: The beverage cooler should be placed in a location where the ambient temperature is
between 60-80° Fahrenheit. If the ambient temperature is outside this range, the performance of the unit may be
affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to
fluctuate.
Lock/Unlock
Your beverage cooler includes a feature that will lock the control panel when if left untouched for 10 seconds.
To unlock the beverage cooler control panel touch the power and lighting buttons simultaneously for 3
seconds.
Setting Temperature
1. Make sure power cord is connected to a properly grounded outlet.
2. Turn power ON.
3. The temperature setting can be adjusted from 36°F to 68°F
4. Temperatures increase or decrease 1°F with each push of the UP ( + ) or DOWN ( - ) button.
NOTE:
Temperatures may fluctuate depending on whether the interior light is ON or OFF and depending on the position of
the bottles.
NOTE:
In the event of a power interruption, your beverage cooler will revert back to the factory settings, 36°F in
the cabinet, once power is restored.
If the unit is unplugged, loses power, or is turned off, you must wait 3 to 5 minutes before restarting.
Attempting to restart the beverage cooler before this time has elapsed may prevent the beverage cooler
from starting.
When you use the beverage cooler for the first time or restart the beverage cooler after having been shut
off for a long time, there will be a few degrees variance between the temperature you select and the one
indicated on the LED readout for the first few hours of operation. After a few hours of operation, the
temperature will normalize to the displayed temperature.
DOOR LOCK
This unit comes with a key lock.
The keys are located inside the plastic bag that contains the instruction manual. To unlock the door, insert
the key into the lock and turn counter clockwise.