User Manual

11
Replacement of Batteries in Remote Controller
1. Press the mark “ ” on back cover of batteries box cover for remote controller with
fingers as shown in the fig, and then remove the batteries box cover along the arrow
direction.
Battery
Cover of battery box
Remove
Reinstall
2. Replace with two #7 (AAA 1.5V) dry batteries.
Make sure positions for “+” pole and “-” pole are
correct.
3. Reinstall batteries box cover.
Note:
 The distance between signal sender and receiving window should be no more
than 8m, and there should be no obstacles between them.

conditioner when using the remote controller.
 Replace new batteries of the same model when replacement is required.
 When you don’t use remote controller for a long time, please take out the
batteries.