Instructions / Assembly
Table Of Contents
20 
TROUBLESHOOTING 
PROBLEM 
POSSIBLE CAUSE 
CORRECTIVE ACTION 
Propane cylinder is empty 
Replace propane cylinder 
Burner won’t light 
Blockage in orifice 
Clear blockage 
Control knob is not in ON position 
Turn control knob to ON 
Gas pressure is low 
Turn cylinder valve OFF and fill the 
cylinder 
Burner flame is low 
Outdoor temperature is less than 40ºF and 
Use a full cylinder 
tank is less than 1/4 full 
Control knob fully ON 
Check burner and orifices for 
blockage 
Carbon build-up 
Dirt or film on reflector and burner screen 
Clean reflector and burner screen 
Thick black smoke 
Blockage in burner 
Remove blockage and clean burner 
inside and outside 










