Instructions / Assembly

7. Attach the bolts onto the damper (4),and put 3pcs
washer onto the bolts,then put the reflector (8)
onto the bolts,put 3pcs washer through the bolts
and fix with screws
8.Attach the protection guards (9) to the upper frame by
inserting the hooks at the top of the guards into the holes
on the supports. Repeat at the bottom of the supports.
Secure the protection guards to the top of the supports
with the fixing brackets(12) and screw in place.
9.Fix the sides panels (13) with the screws (19).
Note:Do not cover the side where the control knob is.
- 9 -
Hardware Used:
3x Studs
3x Wing Nuts
Hardware Used: 4x Screws
Hardware Used: 12x Screws