Gas Fire Table User Manual ITEM#TM19112 A DANGER 1 you smell gas: 1. Hut off gas to the appliance. Z.Extinguish any open flame. 4. If odor continues, keep away from the appliance and immediately call your gas supplier or tire department. A WARNING £0 not store or use gasoline or other estimable vapors and liquids in the vicinity of this or any other appliance. An LP-cinder not connected for use shall not be stored in the vicinity of this or any other appliance. A WARN NG For pulpwood use only.
EST Hes Ee Before vou assemble or operate this unit please carefully read this entire manual Faille to do so may result in a fire, explosion. injury or death. A warning » The installation of this unit must adhere to local Codes or either the National Burl Gas Code, ANTI 2228. PARAFFIN, OR CANCAN S148 1 National Gas and Propane Installation Code. = THIS UNIT IS INTENDED FOR OUTDOOR USE ONLY! This product shall be used cursors ine annihilated space and shall not be used in any enclosed area.
* Combustible material should not be within 72 inches af the top of the unit or within 48 Inches around the snide unit, * Keen the appliance great clear and free farm combustible material, gasoline and other flammable vapors and liquids, * Il the flange gods out while burning, turn the gas valve oft. Wall § minutes before repeating the initial lighting procedure, Once you have aflame started, hold down the contra nab Jor 1 minute.
Sloan as sl ile Only use the regulator and hose assembly provided with this Unit: Replacement parts must be supplied directly by Manufacturer, inspect the burner before use of this Unit if the burner shows any kind of damage, da not operate the appliance NOTE: You must follow all steps to properly assemble this heating item. Make sire the gas valve is turned “OFF” before assembling.
Gore Eo WEG te 8 fmm Cea PARSER GS 5 0 Eva ceca ian Forebode! Hay Door: Burner Guard Lava Rocks Protective Cover Control Knob Electronic aay
Gn snd iE aE 1. Check that the control Knob (0) for the gas supply systems js firmed to the PORE! position before starting any assembly. 2. Remove door rom body (B) and place propane gas tank of included) into the metal stand inside af the body (Bl 3. Turn the cylinder valve on the tank clockwise to close the propane tank. Attach the reassembled regulator from the body (8) to the viewfinder valve by turning the regulator coupling nut clockwise.
4. Uneven the tank is attached to the regulator, hake sure the preseason ous tank ails on the metal stand inside body (8) completely. Tum the pro assembled wit screw on the outer pan of metal stand clockwise to secure the propane gas tank Tightly, 8. Replace done (03 onto the body (BE 8. Remove the rubber cap on the electronic ignition (J) by unscrewing and slide battery (H) into the battery slot. Make sure the positive side of the battery faces outwards.
TA ASSEMBLY INSTRUCTIONS ¥. Pour the lava rocks (5) into the firebomb (80. A WARNING To ensure proper function. the screen (Flo this milliner (12 should be free of lava rocks at all times.
J OPERATION Before performing a leak test, be sure that no sparks can occur and vou are in a Spacious outdated die. Cannot the propane gas dank to the laureate and turn the valve on the Unit to the “of position. Brush a pods and water mixture on all connections, Turn the gas supply an: if bubbles ECLOGUE an any connection there may be a leak IE you smell gas or a leak is discovered urn the gas valve off, disconnect propane gas tank and do not use the appliance until the leak is repaired.
20s yen » Before performing any maintenance always disconnect propane gas tank, = Heep the heating Hem fee and cleat from combustible materials, » Visually inspect burner for constrictors and Keeps tank enclosure free and clear from debris. » Use a soft brush to get tid of the mild stains, jocose dirt and sail after the burns and pumice stones/ lava rocks/Lavatilass are completely angled down. Wipe down with a soft cloth.
aaa ‘The manufacturer warranty Will be voided by, and manufacturer disclaims any responsibility Tor, the following actions: = Modification of the unit and/or components including the gas valve assembly, » Use of any component part not manufactured or approved, + Use and installation other than what is sled in this manual Please contact the manufacturer for replacement pairs.
