Instructions / Assembly

20
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Propane cylinder is empty
Replace propane cylinder
Burner won’t light
Blockage in orifice
Clear blockage
Control knob is not in ON position
Turn control knob to ON
Gas pressure is low
Turn cylinder valve OFF and fill the
cylinder
Burner flame is low
Outdoor temperature is less than 40ºF and
Use a full cylinder
tank is less than 1/4 full
Control knob fully ON
Check burner and orifices for
blockage
Carbon build-up
Dirt or film on reflector and burner screen
Clean reflector and burner screen
Thick black smoke
Blockage in burner
Remove blockage and clean burner
inside and outside