Instructions / Assembly

CAUTION: Fire glass can be sharp and should be handled with caution. It is
recommended to wear gloves and safety glasses while handling product.
Fire Glass Use and Care Instructions
(FG-001)
COVERAGE:
• 10-pound bag covers approximately 1 square ft x 1.25” deep.
CALCULATE HOW MUCH GLASS NEEDED FOR YOUR FIRE PIT:
• Rectangular Fire Pit - (Desired glass height x depth x length) ÷ 19 = pounds required
• Round Fire Pit - (Desired glass height x diameter x diameter) ÷ 19 = pounds required
USE RECOMMENDATIONS:
Kinger Home Fire Glass is the perfect way to enhance the look of an old fireplace or an old fire pit, and delight
visitors at the same time.
• ¼” Kinger Home Fire Glass is to be used with Natural Gas or Propane fire pits or fireplaces.
• ½” Kinger Home Fire Glass is to be used with Natural Gas or Propane fire pits or fireplaces.
• Recycled Kinger Home Fire Glass is to be used with Natural Gas or Propane fire pits or fireplaces –
OUTDOORS ONLY.
• Kinger Home Fire Beads’ can be used with Natural Gas or Propane fire pits or fireplaces.
• Kinger Home Lava Rocks can be used with Natural Gas or Propane fire pits or fireplaces.
INSTRUCTIONS:
1. Rinse glass to remove unwanted dust from manufacturing. Dry on towel.
2. For fire pit applications, we recommend an inch of sand or pea gravel at the bottom of the fire pit for a
sturdy foundation.
3. Evenly pour fire glass over your burner. For optimal results, our recommendation is to pour a minimum of
2-inches over your burner, which allows the gas to filter evenly through the fire glass - creating a beautiful
flame.
CARE:
Little or no care is required after setting product. For an instant shine, you may sprinkle with water to remove
dust. Sun covers are recommended for long term sun exposure.
Kinger Home
4290 E Brickell ST Unit B
Ontario, CA 91761
www.kingerhome.com
818-477-0813