Instructions / Assembly

ManualsBrandsKinger Home ManualsOutdoorsArden 5-Piece Cast Aluminum Outdoor Patio Dining Set with Lattice Weave Design in Bronze

Table Of Contents

Assembly Instruction

Please read these instructions carefully before starting assembly. We suggest you carry out the assembly on

a soft surface like a carpet, so as to avoid scratching the paint. Please note because of the nature of cast

metal, you may find roughness on the surface which enhances the beauty of the product and is not a defect.

*Do not discard any of packaging until you have checked that you have all parts and pack of fittings.

*Keep children away during assembly.This item contains small parts which can be swallowed by children.

*Retain the assembly instructions for future reference.

1. Part List

ltem Photo Description Qty ltem Photo Description Qty

A Table Top 1 E Flat Washer(m8) 12

B Joint part 4 F

Spring

washer(m8)

C Leg 4 G Nut(m8) 12

D Stud(8*34) 4 H Nut Cap(m8) 12

W Wrench 1

2. Assembly Instructions

Step1

Step2

Step3

Summary of content (4 pages)

PAGE 1
Assembly Instruction Please read these instructions carefully before starting assembly. We suggest you carry out the assembly on a soft surface like a carpet, so as to avoid scratching the paint. Please note because of the nature of cast metal, you may find roughness on the surface which enhances the beauty of the product and is not a defect. *Do not discard any of packaging until you have checked that you have all parts and pack of fittings. *Keep children away during assembly.
PAGE 2
1.Lay the table(A)upside down on an even soft clean surface.Fix the leg (C) into the table top using stud(D), flat washer(E),spring washer(F),nut(G) and nut cap(H).Tighten all bolts. 2.Attach the joint part (B)to the four legs using flat washer(E),spring washer(F),nut(G) and nut cap(H). DO NOT OVER TIGHTEN. Warning:Do not force components and overtighten the nuts during assembly. 3. Care & Maintenance Warning:If using the umbrella,please provide your own unbrella base. 1. This product is NOT a TOY.
PAGE 3
Assembly Instruction Please read these instructions carefully before starting assembly. We suggest you carry out the assembly on a soft surface like a carpet, so as to avoid scratching the paint. Please note because of the nature of cast metal, you may find roughness on the surface which enhances the beauty of the product and is not a defect. *Do not discard any of packaging until you have checked that you have all parts and pack of fittings. *Keep children away during assembly.
PAGE 4
NOTE:We used sticker 1 and 2 to mark front leg and hind leg. 1.Assemble the back (A1) to the seat (B1)on an even soft clean surface using washer (E),spring washer(F), nut(G),nut cap(H). 2.Attach the four legs (D1)to the seat using washer (E),spring washer(F),nut(G),nut cap(H). 3.Attach the two arms (C1)to the back using stud (I2) washer (J),spring washer(K),nut(L),nut cap(M).Attach the two arms to the seat using stud (I1) washer (J),spring washer(K),nut(L),nut cap(M). 4.Tighten all bolts.