Instructions / Assembly

Assembly Instruction

Please read these instructions carefully before starting assembly. We suggest you carry out the assembly on a soft

surface like a carpet, so as to avoid scratching the paint. Please note because of the nature of cast metal, you may

find roughness on the surface which enhances the beauty of the product and is not a defect.

*Do not discard any of packaging until you have checked that you have all parts and pack of fittings.

*Keep children away during assembly.This item contains small parts which can be swallowed by children.

*Retain the assembly instructions for future reference.

1. Part List

ltem Photo Description Qty ltem Photo Description Qty

A1 Back 1 I1 Stud(m6*25) 4

B1 Seat 1 I2 Stud(m6*35) 2

C1 Arm 2 J Flat washer(m6) 6

D1 Chair Leg 4 K Spring Washer(m6) 6

E Flat washer(m8) 10 L Nut (m6) 6

Spring

Washer(m8)

10 M Nut Cap (m6) 6

G Nut (m8) 10 W Wrench 1

H Nut Cap (m8) 10 X Screwdriver 1

2. Assembly Instructions

Step1 Step2

Step3 Step4

PAGE 1
Assembly Instruction Please read these instructions carefully before starting assembly. We suggest you carry out the assembly on a soft surface like a carpet, so as to avoid scratching the paint. Please note because of the nature of cast metal, you may find roughness on the surface which enhances the beauty of the product and is not a defect. *Do not discard any of packaging until you have checked that you have all parts and pack of fittings. *Keep children away during assembly.
PAGE 2
NOTE:We used sticker 1 and 2 to mark front leg and hind leg. 1.Assemble the back (A1) to the seat (B1)on an even soft clean surface using washer (E),spring washer(F), nut(G),nut cap(H). 2.Attach the four legs (D1)to the seat using washer (E),spring washer(F),nut(G),nut cap(H). 3.Attach the two arms (C1)to the back using stud (I2) washer (J),spring washer(K),nut(L),nut cap(M).Attach the two arms to the seat using stud (I1) washer (J),spring washer(K),nut(L),nut cap(M). 4.Tighten all bolts.