Instructions / Assembly

Step 1

Place all parts on a clean and soft surface

Step 2

Turn over the table top.Attach the stud M8(E) into the

nuts(inside table).

Attach table legs(②) to the studs on the table top (①)

using washers and nuts (A,B,C).DO NOT over tighten

Step 3

Attach the table legs support (③)to the four legs (②)

using flat washer,spring washer and nuts(A,B,C)

DO NOT over tighten.

Step 4

Tighten all nuts with wrench and turn over the table.

Adjust the pre-installed rubber pad (L) until the table

is level with the ground .Tighten all the nuts and cover

them with nut caps(D).Your table can use now.

ASSEMBLY INSTRUCTIONS