User Manual

Revision 1.0 Page 18 of 78
nRF24L01+ Product Specification
Note: Wanted signal level at Pin = -64 dBm. Two interferers with equal input power are used. The
interferer closest in frequency is unmodulated, the other interferer is modulated equal with the
wanted signal. The input power of interferers where the sensitivity equals BER = 0.1% is pre-
sented.
Table 10. RX intermodulation test performed according to Bluetooth Specification version 2.0
Datarate Symbol Parameter (condition) Notes Min. Typ. Max. Units
2Mbps P_IM(6 Input power of IM interferers at 6 and 12MHz offset
from wanted signal
-42 dBm
P_IM(8) Input power of IM interferers at 8 and 16MHz offset
from wanted signal
-38 dBm
P_IM(10) Input power of IM interferers at 10 and 20MHz offset
from wanted signal
-37 dBm
1Mbps P_IM(3) Input power of IM interferers at 3 and 6MHz offset
from wanted signal
-36 dBm
P_IM(4) Input power of IM interferers at 4 and 8MHz offset
from wanted signal
-36 dBm
P_IM(5) Input power of IM interferers at 5 and 10MHz offset
from wanted signal
-36 dBm
250kbps P_IM(3) Input power of IM interferers at 3 and 6MHz offset
from wanted signal
-36 dBm
P_IM(4) Input power of IM interferers at 4 and 8MHz offset
from wanted signal
-36 dBm
P_IM(5) Input power of IM interferers at 5 and 10MHz offset
from wanted signal
-36 dBm