Third Party Verification Claim

Test Report No.: T51810270248TY Date: SEP 11, 2018 Page 15 of 19
Specimen Description:
1. Grey coating on woven (Pattern) + Yellow coating on woven (Warning, pattern) + Black coating on woven
(Pattern, lettering)
2. Green coating on woven (Pattern) + White coating on woven (Pattern)
3. Green woven w/ white plastic sheet backing (Bouncer) + Yellow woven w/ white plastic sheet backing
(Bouncer) + Blue woven w/ white plastic sheet backing (Bouncer)
4. Dark blue woven w/ white plastic sheet backing (Bouncer) + Red woven w/ white plastic sheet backing
(Bouncer) + Dull yellow woven w/ white plastic sheet backing (Bouncer)
5. Kelly woven w/ white plastic sheet backing (Bouncer) + Dull green woven w/ white plastic sheet backing
(Bouncer) + Light green woven w/ white plastic sheet backing (Bouncer)
6. Red plastic (Bouncer) w/ Transparent soft plastic ring (Bouncer) + Dull orange soft plastic (Buncer) + Yellow
plastic (Holder)
7. Red soft plastic (Ball) + Orange soft plastic (Ball) + Yellow soft plastic (Ball)
8. Blue soft plastic (Ball) + Green soft plastic (Ball)
9. White rubber core (Elastic band) + White foam (Inner handle)
10. Dark green woven w/ white plastic sheet backing (Bouncer) + Blue soft plastic sheet (Binding) + Light red
woven w/ white plastic sheet backing (Bouncer)
Note: - % = percentage by weight
- ND = Not Detected (lower than MDL)
- MDL = Method Detection Limit
- 1% = 10000 mg/kg = 10000 ppm
- The result(s) is (are) calculated using the total specimen weight for composite test.
- Result(s) of specimen No.1-No.9 is(are) extracted from report No. T51810230557TY.