Datasheet

SPEC NO: DSAB1114 REV NO: V.7 DATE: APR/07/2007 PAGE: 1 OF 3

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU

Package Dimensions

T-1 (3mm) SOLID STATE LAMP

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

Description

The High Efficiency Red source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide Orange

Light Emitting Diode.

Part Number: L-934EC

HIGH EFFICIENCY RED

Features

z LOW POWER CONSUMPTION.

z POPULAR T-1 DIAMETER PACKAGE.

z GENERAL PURPOSE LEADS.

z RELIABLE AND RUGGED.

z LONG LIFE - SOLID STATE RELIABILITY.

z AVAILABLE ON TAPE AND REEL.

z RoHS COMPLIANT.

PAGE 1
T-1 (3mm) SOLID STATE LAMP Part Number: L-934EC HIGH EFFICIENCY RED Description Features z LOW The High Efficiency Red source color devices are made with POWER CONSUMPTION. T-1 DIAMETER PACKAGE. Gallium Arsenide Phosphide on Gallium Phosphide Orange z GENERAL PURPOSE LEADS. Light Emitting Diode. z RELIABLE AND RUGGED. z POPULAR z LONG LIFE - SOLID STATE RELIABILITY. z AVAILABLE ON TAPE AND REEL. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.
PAGE 2
Selection Guide Dice Part No. L-934EC Iv (mcd) [2] @ 10mA Lens Type Viewing Angle [1] Min. Typ. 2θ1/2 18 60 50° HIGH EFFICIENCY RED (GaAsP/GaP) WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max.
PAGE 3
High Efficiency Red L-934EC SPEC NO: DSAB1114 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/07/2007 DRAWN: D.M.