Datasheet

SPEC NO: DSAB0737 REV NO: V.3 DATE: MAR/18/2006 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

T-1 (3mm) SOLID STATE LAMP

Features



LOW POWER CONSUMPTION.



POPULAR T-1 DIAMETER PACKAGE.



GENERAL PURPOSE LEADS



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



AVAILABLE ON TAPE AND REEL.



RoHS COMPLIANT.

Description

The Hyper Red source color devices are made with DH

InGaAlP on GaAs substrate Light Emitting Diode.

P/N: L-934SURC-E HYPER RED

PAGE 1
T-1 (3mm) SOLID STATE LAMP P/N: L-934SURC-E Features HYPER RED Description LOW POWER CONSUMPTION. The Hyper Red source color devices are made with DH POPULAR T-1 DIAMETER PACKAGE. InGaAlP on GaAs substrate Light Emitting Diode. GENERAL PURPOSE LEADS RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.
PAGE 2
Selection Guide Part No. Dice L-934SURC-E Iv (mcd) [2] @ 20mA Lens Type HYPER RED (InGaAlP) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ θ1/2 900 1300 50° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity/ Luminous Flux: +/-15% Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red λD[1] Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Hyper Red L-934SURC-E SPEC NO: DSAB0737 REV NO: V.3 DATE: MAR/18/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.