Datasheet

SPEC NO: DSAA1932 REV NO: V.5 DATE: JAN/04/2006 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Part No. Dice Lens Type
Iv (mcd)
@ 20 mA
Viewing
Angle
Min. Typ.
2θ
θθ
θ1/2
L-934MBC BLUE (GaN) WATER CLEAR 36 80
20°
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at T
A=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak
Peak Wavelength Blue 430 nm IF=20mA
λD
Dominant Wavelength Blue 466 nm IF=20mA
∆λ1/2
Spectral Line Half-width Blue 60 nm IF=20mA
C Capacitance Blue 100 pF VF=0V;f=1MHz
VF Forward Voltage Blue 3.8 4.5 V IF=20mA
IR Reverse Current Blue 10 uA VR= 5V
Parameter Blue Units
Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds