Datasheet

SPEC NO: DSAA1932 REV NO: V.5 DATE: JAN/04/2006 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG

Package Dimensions

Description

The Blue source color devices are made with GaN on SiC

Light Emitting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or

anti-electrostatic glove when handling the LEDs.

All devices, equipment and machinery must be electrically

grounded.

P/N: L-934MBC BLUE

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

T-1 (3mm) SOLID STATE LAMP

Features



LOW POWER CONSUMPTION.



POPULAR T-1 DIAMETER PACKAGE.



GENERAL PURPOSE LEADS



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



AVAILABLE ON TAPE AND REEL.



RoHS COMPLIANT.

PAGE 1
T-1 (3mm) SOLID STATE LAMP ATTENTION P/N: L-934MBC BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description LOW POWER CONSUMPTION. The Blue source color devices are made with GaN on SiC POPULAR T-1 DIAMETER PACKAGE. Light Emitting Diode. GENERAL PURPOSE LEADS Static electricity and surge damage the LEDS. RELIABLE AND RUGGED. It is recommended to use a wrist band or LONG LIFE - SOLID STATE RELIABILITY.
PAGE 2
Selection Guide Part No. Dice L-934MBC Iv (mcd) @ 20 mA Lens Type BLUE (GaN) WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 36 80 20° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Blue L-934MBC Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA1932 REV NO: V.5 DATE: JAN/04/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.