Datasheet

SPEC NO: DSAD0469 REV NO: V.3 DATE: MAR/20/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU

Package Dimensions

L-813SRD-D SUPER BRIGHT RED

Description

The Super Bright Red source color devices are made

with Gallium Aluminum Arsenide Red Light Emitting

Diode.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

10mm SOLID STATE LAMP

Features



10mm DIAMETER BIG LAMP.



I.C. COMPATIBLE.



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



RoHS COMPLIANT.

PAGE 1
0mm SOLID STATE LAMP L-813SRD-D Features SUPER BRIGHT RED Description 10mm DIAMETER BIG LAMP. The Super Bright Red source color devices are made I.C. COMPATIBLE. with Gallium Aluminum Arsenide Red Light Emitting RELIABLE AND RUGGED. Diode. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4.
PAGE 2
Selection Guide Part No. Dice L-813SRD-D Iv (mcd) @ 20mA Lens Type SUPER BRIGHT RED (GaAlAs) RED DIFFUSED Viewing Angle Min. Typ. 2θ θ1/2 280 350 60° Units Test Conditions Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max.
PAGE 3
Super Bright Red L-813SRD-D Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD0469 REV NO: V.3 DATE: MAR/20/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.