Datasheet

SPEC NO: DSAB9436 REV NO: V.7 DATE: MAR/20/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

10mm SOLID STATE LAMP

Description

The Yellow source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide

Yellow Light Emitting Diode.

L-813YD YELLOW

Features



10mm DIAMETER BIG LAMP.



I.C. COMPATIBLE.



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



RoHS COMPLIANT.

PAGE 1
0mm SOLID STATE LAMP L-813YD Features YELLOW Description 10mm DIAMETER BIG LAMP. The Yellow source color devices are made with I.C. COMPATIBLE. Gallium Arsenide Phosphide on Gallium Phosphide RELIABLE AND RUGGED. Yellow Light Emitting Diode. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4.
PAGE 2
Selection Guide Part No. Dice L-813YD Iv (mcd) @ 20mA Lens Type YELLOW (GaAsP/GaP) YELLOW DIFFUSED Viewing Angle Min. Typ. 2 θ 1/2 10 50 60° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Yellow L-813YD Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB9436 REV NO: V.7 DATE: MAR/20/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.