Datasheet

SPEC NO: DSAC1449 REV NO: V.3 DATE: MAR/20/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

Description

The Yellow source color devices are made with Gal-

lium Arsenide Phosphide on Gallium Phosphide Yel-

low Light Emitting Diode.

L-793YD YELLOW

Features



8mm DIAMETER BIG LAMP.



WIDE VIEWING ANGLE.



I.C.COMPATIBLE.



RELIABLE AND RUGGED.



LONG LIFE-SOLID STATE RELIABILITY.



RoHS COMPLIANT.

8mm ROUND LED LAMP

PAGE 1
8mm ROUND LED LAMP L-793YD Features YELLOW Description 8mm DIAMETER BIG LAMP. The Yellow source color devices are made with Gal- WIDE VIEWING ANGLE. lium Arsenide Phosphide on Gallium Phosphide Yel- I.C.COMPATIBLE. low Light Emitting Diode. RELIABLE AND RUGGED. LONG LIFE-SOLID STATE RELIABILITY. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.
PAGE 2
Selection Guide Part No. Dice L-793YD Iv (mcd) @ 20mA Lens Type YELLOW (GaAsP/GaP) YELLOW DIFFUSED Viewing Angle Min. Typ. 2θ θ1/2 18 50 60° Units Test Conditions Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max.
PAGE 3
Yellow L-793YD Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAC1449 REV NO: V.3 DATE: MAR/20/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.