Datasheet

SPEC NO.
..
.: DSAB9631 REV NO.
..
.: V.3 DATE: MAR/21/2005 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.M.TANG
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Part No. Dice Lens Type
Iv (mcd)
@ 10mA
Viewing
Angle
Min. Typ.
2θ
θθ
θ1/2
L-714HDT BRIGHT RED (GaP) RED DIFFUSED
0.4 1
110°
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at T
A=25°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak
Peak Wavelength Bright Red 700 nm IF=20mA
λD
Dominant Wavelength Bright Red 660 nm IF=20mA
∆λ1/2
Spectral Line Half-width Bright Red 45 nm IF=20mA
C Capacitance Bright Red 40 pF VF=0V;f=1MHz
VF Forward Voltage Bright Red 2.25 2.5 V IF=20mA
IR Reverse Current Bright Red 10 uA VR = 5V
Parameter Bright Red Units
Power dissipation 120 mW
DC Forward Current 25 mA
Peak Forward Current [1] 130 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.