Datasheet

SPEC NO: DSAA5257

REV NO: V.6 DATE: MAR/28/2005

PAGE:

APPROVED: J. Lu

CHECKED: Allen Liu DRAWN: S.H.CHEN

1 3/4 (5mm) SOLID STATE LAMP

Features

LOW POWER CONSUMPTION.

POPULAR T

1 3/4 DIAMETER PACKAGE.

GENERAL PURPOSE LEADS.

RELIABLE AND RUGGED.

LONG LIFE

SOLID STATE RELIABILITY.

AVAILABLE ON TAPE AND REEL.

RoHS COMPLIANT.

Package Dimension

Notes:

1. All dimensions are in millimeters (inches)

Tolerance is

±0

.25(0.01") unless otherwise noted

3. Lead spacing is measured where the lead emerge from the package.

4. Specifications are subject to change without notice

7113YC YELLOW

Description

The Yellow source color devices are made with Gallium

Arsenide Phosphide on Gallium Phosphide Yellow Light

Emitting Diode.

PAGE 1
T-1 3/4 (5mm) SOLID STATE LAMP L-7113YC YELLOW Features zLOW POWER CONSUMPTION. Description zPOPULAR T-1 3/4 DIAMETER PACKAGE. The Yellow source color devices are made with Gallium zGENERAL PURPOSE LEADS. Arsenide Phosphide on Gallium Phosphide Yellow Light zRELIABLE AND RUGGED. Emitting Diode. zLONG LIFE - SOLID STATE RELIABILITY. zAVAILABLE ON TAPE AND REEL. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.
PAGE 2
Selection Guide Part No. Dice L-7113YC Iv (mcd) @ 10mA Lens Type YELLOW (GaAsP/GaP) WATER CLEAR Viewing Angle Min. Typ. 2θ1/2 18 40 20° Units Test Conditions Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max.
PAGE 3
Yellow L-7113YC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA5257 REV NO: V.6 DATE: MAR/28/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.