Datasheet

SPEC NO: DSAB8288 REV NO: V.11 DATE: JUL/07/2007 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.CHEN ERP: 1101005307
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
L-7113SURC-E Hyper Red (InGaAIP) WATER CLEAR 1500 2200
20
°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 640 nm I
F=20mA
λD [1] Dominant Wavelength Hyper Red 630 nm I
F=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 25 nm I
F=20mA
C Capacitance Hyper Red 45 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Hyper Red 1.9 2.5 V IF=20mA
I
R Reverse Current Hyper Red 10 uA VR = 5V
Parameter Hyper Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 200 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds